Freeside Atlanta - User contributions [en]

Wishlist

2013-04-03T01:01:09Z

AUGuru: /* Consumables */

We're always looking for new opportunities to facilitate projects/education in the space. New equipment can help us do that, so we decided to make a wishlist of some of the things that we need for the space.

== Volunteer Opportunities ==
* Electrical wiring: running new outlets, and...other activities... ('''certification required''')
* Woodworking, construction: help with shelf/hutch building for electronics, help with member storage build-out
* Mural Art: artists, pick a spot on the wall and make it yours! We also want input on designing logos for each of our zones

== Consumables ==
* ABS: Our 3D printers need more spools in a variety of colors
* Paint (dark, black, matte): for shrouding the stage in the darkness
* Paint (brighter colors especially, not black/grey/white): we are painting an internet meme explosion mural in the front bathroom, and Carrie needs more paint
* Printer ink for the [http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=2512009 HP L7680]

== Software ==
* Recording and mastering software/hardware
* Valid Windows licenses
* VOIP solution for linking our Google Voice number (or similar service) to the space

== Hardware ==
* Good, functional computers
* Audio/lighting/DJ equipment
* Interesting Human Interface Devices
* Arduinos, other automation controllers or kits
* Raspberry Pis: for use with the access control project, or with the informational kiosks like we have in the welcome zone
* 4+ port NIC card for rack system, or full system: we are trying to build a router to create subnets, see Alan or any IT staff person for details
* Mounts for rack systems: stacking the pizza boxen on top of each other just won’t do
* Larger LCD monitors, flat screen TVs: we want to put up informational kiosk displays around the space
* Breadboards: some members have asked and are unclear if some “projects” could be reclaimed or if there are extra breadboards to go around
* Folding chairs: for when we host large talks or events
* Door and ceiling: for the classroom, to cut down on the noise
* Door/Steel/Mesh: for the server room door, for peace of mind
* Help with getting the existing phone system up and running, for being able to dial other phones in the space, and linking that to VOIP

== Storage ==
* Member storage bins: We are getting new members! Let’s have a few bins at the ready to get them on-board
* Small to Medium plastic bins: We can start subdividing or replacing cardboard boxes storing things in the parts storage

== Materials ==
* Lumber: ask about specifics, but the two main projects that could use some lumber are for the electronics lab benches and for improvements to member storage
* Engraving plastic: for creating signage with Randy’s CNC!

== Equipment ==
* Pallet jack
* Pottery wheel
* Welding supplies
** UV Curtain Material
** Welding Gloves

== Tools ==
* Hammer drill
* Concrete bits
* Painting supplies
* Magnetic Sweeper/Pickup tool for the floor
* 1/4" Allen wrench (for the lathe)

Wishlist

2013-03-05T15:18:26Z

AUGuru:

We're always looking for new opportunities to facilitate projects/education in the space. New equipment can help us do that, so we decided to make a wishlist of some of the things that we need for the space.

== Volunteer Opportunities ==
* Electrical wiring: running new outlets, and...other activities... ('''certification required''')
* Woodworking, construction: help with shelf/hutch building for electronics, help with member storage build-out
* Mural Art: artists, pick a spot on the wall and make it yours! We also want input on designing logos for each of our zones

== Consumables ==
* ABS: Our 3D printers need more spools in a variety of colors
* Paint (dark, black, matte): for shrouding the stage in the darkness
* Paint (brighter colors especially, not black/grey/white): we are painting an internet meme explosion mural in the front bathroom, and Carrie needs more paint
* Printer ink for the [http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=2512009 HP L7680]

== Software ==
* Recording and mastering software/hardware
* Valid Windows licenses

== Hardware ==
* WKA12-8F2 Werker Battery SmartUPS RM Series SUA750RM2U APC (American Power Conversion) UPS Battery Replacement
* APC BR24BPG Back-UPS Pro External Battery Pack For 1500VA Back-UPS Pro models
* Good, functional computers
* Audio/lighting/DJ equipment
* Interesting Human Interface Devices
* Arduinos, other automation controllers or kits
* Raspberry Pis: for use with the access control project, or with the informational kiosks like we have in the welcome zone
* 4+ port NIC card for rack system, or full system: we are trying to build a router to create subnets, see Alan or any IT staff person for details
* Mounts for rack systems: stacking the pizza boxen on top of each other just won’t do
* Larger LCD monitors, flat screen TVs: we want to put up informational kiosk displays around the space
* Breadboards: some members have asked and are unclear if some “projects” could be reclaimed or if there are extra breadboards to go around
* Folding chairs: for when we host large talks or events
* Door and ceiling: for the classroom, to cut down on the noise
* Door/Steel/Mesh: for the server room door, for peace of mind

== Storage ==
* Member storage bins: We are getting new members! Let’s have a few bins at the ready to get them on-board
* Small to Medium plastic bins: We can start subdividing or replacing cardboard boxes storing things in the parts storage

== Materials ==
* Lumber: ask about specifics, but the two main projects that could use some lumber are for the electronics lab benches and for improvements to member storage
* Engraving plastic: for creating signage with Randy’s CNC!

== Equipment ==
* Pallet jack
* Pottery wheel
* Welding supplies
** UV Curtain Material
** Welding Gloves

== Tools ==
* Hammer drill
* Concrete bits
* Painting supplies
* Magnetic Sweeper/Pickup tool for the floor

Sheet Metal Brake

2013-02-15T07:03:42Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:Info.jpg|50px|link=]][http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 
[[File:RTFM.PNG|50px|link=]][http://manuals.harborfreight.com/manuals/67000-67999/67240.pdf PDF Manual] 
[[File:Video.jpg|50px|link=]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T07:03:20Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:Info.jpg|60px|link=]][http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 
[[File:RTFM.PNG|50px|link=]][http://manuals.harborfreight.com/manuals/67000-67999/67240.pdf PDF Manual] 
[[File:Video.jpg|50px|link=]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T07:02:47Z

AUGuru:

File:Info.jpg

2013-02-15T07:02:24Z

AUGuru: Info Icon

Info Icon

Sheet Metal Brake

2013-02-15T07:00:39Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFM.PNG|50px|link=]][http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 
[[File:RTFM.PNG|50px|link=]][http://manuals.harborfreight.com/manuals/67000-67999/67240.pdf PDF Manual] 
[[File:Video.jpg|50px|link=]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:58:03Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFM.PNG|50px|link=]][http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[[File:Video.jpg|50px|link=]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:57:25Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFM.PNG|50px|link=]][http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[[File:Video.jpg|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:56:24Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFM.PNG|50px|link=http://www.harborfreight.com/30-inch-bending-brake-67240.html]][http://www.harborfreight.com/30-inch-bending-brake-67240.html|Harbor Freight 30" Bending Brake] 

[[File:Video.jpg|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:54:08Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFM.PNG|50px|link=http://www.harborfreight.com/30-inch-bending-brake-67240.html|Harbor Freight 30" Bending Brake]] 

[[File:Video.jpg|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:53:00Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFM.PNG|50px|link=http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake]] 

[[File:Video.jpg|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:50:48Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html [File:RTFM.PNG|50px] Harbor Freight 30" Bending Brake] 

[[File:Video.jpg|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:50:11Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html [[File:RTFM.PNG|50px]] Harbor Freight 30" Bending Brake] 

[[File:Video.jpg|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:49:10Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFM.PNG|border|50px]][http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[[File:Video.jpg|border|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:48:42Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFM.png|border|50px]][http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[[File:Video.jpg|border|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:48:19Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[[File:RTFMh.png|border|50px]][http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[[File:Video.jpg|border|50px]][http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|100px]] Eye Protection Required

[[category: Equipment]]

File:Video.jpg

2013-02-15T06:47:28Z

AUGuru: Video Icon

Video Icon

Sheet Metal Brake

2013-02-15T06:33:45Z

AUGuru: /* Restrictions */

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* Metal and bendable sheet goods only. Do not use on wire.
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:32:15Z

AUGuru:

[[File:30inch Metal Brake.jpg|thumb|300px]]

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|100px]] Eye Protection Required

[[category: Equipment]]

File:30inch Metal Brake.jpg

2013-02-15T06:29:16Z

AUGuru:

Sheet Metal Brake

2013-02-15T06:27:01Z

AUGuru:

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:24:24Z

AUGuru:

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as, or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Mark or Score metal along the intended bend 
Use clamps to secure sheet to bend with the pressing plate on top. 
Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:22:35Z

AUGuru:

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as, or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Use clamps to secure sheet to bend with the pressing plate on top. Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|100px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|100px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:22:01Z

AUGuru:

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as, or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Use clamps to secure sheet to bend with the pressing plate on top. Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

[[File:Crush.png|border|50px]] Crush and Pinch Risk
== Safety ==
[[File:Goggles.PNG|border|50px]] Eye Protection Required

[[category: Equipment]]

Sheet Metal Brake

2013-02-15T06:16:48Z

AUGuru:

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as, or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Use clamps to secure sheet to bend with the pressing plate on top. Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

= Warnings =

<gallery>
File:Hand Injury.png|Pinch Risk
</gallery>
== Safety ==
<gallery>
File:Goggles.jpg|Eye Protection Required
</gallery>

[[category: Equipment]]

File:Entrapment.png

2013-02-15T06:13:11Z

AUGuru: ISO Entrapment Warning

ISO Entrapment Warning

File:Flammable.png

2013-02-15T06:12:34Z

AUGuru: ISO Flammable Warning

ISO Flammable Warning

File:HighSpeedMovingParts.png

2013-02-15T06:12:03Z

AUGuru: ISO High Speed Moving Parts Warning

ISO High Speed Moving Parts Warning

File:NonIoizingRadiation.png

2013-02-15T06:10:40Z

AUGuru: Non Ionizing Radiation Warning

Non Ionizing Radiation Warning

File:WeldingMask.PNG

2013-02-15T06:09:54Z

AUGuru: ISO Welding Mask Required

ISO Welding Mask Required

File:WashHands.PNG

2013-02-15T06:09:16Z

AUGuru: ISO Wash Hands

ISO Wash Hands

File:UV.png

2013-02-15T06:08:52Z

AUGuru: ISO UV Warning

ISO UV Warning

File:Unplug.PNG

2013-02-15T06:08:26Z

AUGuru: ISO Unplug After Use

ISO Unplug After Use

File:RTFM.PNG

2013-02-15T06:07:53Z

AUGuru: ISO Read Instructions icon

ISO Read Instructions icon

File:Radiation.PNG

2013-02-15T06:07:21Z

AUGuru: ISO Radiation Warning

ISO Radiation Warning

File:Poison.PNG

2013-02-15T05:59:24Z

AUGuru: ISO Poison Warning

ISO Poison Warning

File:Lockout.PNG

2013-02-15T05:56:05Z

AUGuru: ISO Lockout symbol

ISO Lockout symbol

File:Laser.PNG

2013-02-15T05:52:59Z

AUGuru: ISO Laser Warning Icon

ISO Laser Warning Icon

File:Hot.gif

2013-02-15T05:52:32Z

AUGuru: ISO Hot surface icon

ISO Hot surface icon

File:Hearing.PNG

2013-02-15T05:52:02Z

AUGuru: ISO Hearing Protection Required icon

ISO Hearing Protection Required icon

File:HardHat.PNG

2013-02-15T05:51:31Z

AUGuru: ISO Hard Hat Required icon

ISO Hard Hat Required icon

File:Goggles.PNG

2013-02-15T05:50:53Z

AUGuru: ISO Goggles Required Icon

ISO Goggles Required Icon

File:Gloves.PNG

2013-02-15T05:50:29Z

AUGuru: ISO Gloves Required Icon

ISO Gloves Required Icon

File:ElectricShock.PNG

2013-02-15T05:50:03Z

AUGuru: ISO Electric Shock Risk Icon

ISO Electric Shock Risk Icon

File:Cutting.PNG

2013-02-15T05:49:31Z

AUGuru: ISO Cutting Injury Icon

ISO Cutting Injury Icon

File:Crush.png

2013-02-15T05:48:56Z

AUGuru: AUGuru uploaded a new version of "File:Crush.png": ISO Crush Injury Icon

ISO hand crush injury warning

File:BreathingMask.PNG

2013-02-15T05:46:55Z

AUGuru: ISO Breathing Mask Icon

ISO Breathing Mask Icon

File:Attention.PNG

2013-02-15T05:46:30Z

AUGuru: ISO Attention Info symbol

ISO Attention Info symbol

File:Crush.png

2013-02-15T05:31:02Z

AUGuru: ISO hand crush injury warning

ISO hand crush injury warning

Sheet Metal Brake

2013-02-15T05:00:53Z

AUGuru:

= [[Zone]] =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= Owner(s) =
* Randy Farmer

== Permissions ==
For general use by members. Treat equipment as if it were your own and put away as, or better than you found it.
Contact owner with questions or issues.

== Restrictions ==
* For up to 18 gauge steel
* For up to 16 gauge aluminum
* Material being bent should be clean and rust free
* The two c-clamps belong with the brake and should be stored with it

= About =
For bending thin sheet metal up to 90 degrees.

= Basic Instructions =
Use clamps to secure sheet to bend with the pressing plate on top. Align both to the leading edge of the supporting plate, tighten clamps, and pull handles on the moving plate to desired angle.

== Specifications and Detailed Instructions ==

[http://www.harborfreight.com/30-inch-bending-brake-67240.html Harbor Freight 30" Bending Brake] 

[http://www.youtube.com/watch?v=L8tTs5lO3mM Good YouTube demonstration of this style brake]

[[category: Equipment]]